The new series for heavy-duty tasks
Safety light barrier
Save energy with “digital hydraulics”
Adjustable sheet metal gratings
Cranked bending beam for making small Z-, U- and hat-profiles
Each bending joint is hydraulically driven
Automatic crowning system
Automatic electronic back gauge
BMS-multi-touch control
Optional: Cutting device on linear axis
Tough as nails.
Precise and controlled in every detail.
The new Biegemaster S-BEND series is a hydraulic bending machine for heavy-duty tasks. It offers not only outstanding uniform force distribution with a bending capacity of up to 3 mm steel and 4 mm aluminum, but also high precision and reliable results – even with large bending lengths. Hydraulically driven bending joints, a rigid machine construction, and precise clamping-beam geometry ensure clean bends and reproducible results in daily use.
Powerful bending
High bending performance
Energy–efficient
Up to 50% energy savings with
“digital hydraulics
High profile diversity
Cranked bending beam for H-shaped, trapezoidal, and Z-shaped profiles
Highlights of the S-BEND series
Easy and quick bending of demanding roof, wall and façade profiles
Crowned bend sheet for more profile variety (e.g., hat, trapezoid, and Z-profiles)
Automatic bombing
The clamping beam can be controlled with millimeter precision for perfect seams
Each bending joint is powerfully hydraulically driven with automatic camber adjustment
BMS Multi-Touch Control
Pre-programming of profiles, transfer via WLAN or USB
Archive on the machine of all previously used projects
Optional: Cutting device on linear axis
Optional: Hydraulic clamping jaw adjustment to compensate for different sheet metal thicknesses
Technical specifications
Lengths: 3-12 metres
Bending capacity: up to 3 mm steel and 4 mm aluminum
Back gauge: Slider, computer-operated
Bending directions: 1
Powered bending joints: Depending on the length, all bending joints are hydraulic
Control: All options possible
Bending angle: Up to 150 degrees
Cutting device: Optional available
Clamp jaw adjustment: available as an option
Energy-efficient: 50% energy savings through ‘digital hydraulics
Precise positioning of the sheet metal
Computer-operated back gauge fingers enable the simple and precise positioning of sheet metals. The back gauge fingers hereby drive automatically into the correct position with each new bending phase. All back gauge fingers can be freely positioned over the entire bending length for optimal adjustment to the workpiece.
Thanks to the freely positionable foot switch, both hands remain free when fixing the sheet metal.
Computer-operated electronic precision back gauge
Operator-independent positioning
Reproducible bending results
Driven by a maintenance-free timing belt
Precise sheet metal cutting
The sheet metal is cut with millimetre precision using the integrated shear right from the first fixing. The S-bend is optionally equipped with an electric cutting device. Fitting the clamping beam on the machine body eliminates constraining contours and force effects. Driven by a maintenance-free timing belt.
Cutting device driven by a maintenance-free timing belt
Cutting capacity of up to 2 mm steel
Fitting the clamping beam on the machine body eliminates guide rails and force effects through cutting
Powerful and precise hydraulic bending
Each stand / tension arm unit is driven by two hydraulic cylinders. The robust and rigid construction ensures an even bending capacity over the entire length. With the optionally available grippers, the XBEND bends fully automatically and without manual intervention. This eliminates user errors.
Fast, precise and quiet bending with an electro-kinetic drive unit
Demanding Bending parts: e.g., hat, trapezoidal, and Z profiles
All common profiles with a bending length ranging from 3 to 12 metres with material thicknesses of up to 2 mm can be precisely folded.
Do you have any questions?
Our competent staff is always happy to assist you.
Profile creation via touch display or office computer
The BMS multi-touch control system enables intuitive operation by touching the screen. This ensures that new profiles can be created quickly or created using touchscreen painting. The control system can draw on stored profiles. Automatic bend sequence calculations with graphic simulation and illustration complete this all-rounder. The BMS multi-touch control system allows even untrained users to create profiles themselves in no time.
Remote Maintenance
Using a remote maintenance function, Biegemaster can support users of the BMS Multi-Touch system in creating profiles or read out parameters for subsequent analysis.
Preparation on the Office PC
For highly efficient work preparation, profiles can also be created easily in advance using our software at the office workstation and then transferred to the machine.
Draw profiles directly at the machine using screen painting
Simply load stored profiles from the archive
Simply create profiles on the office computer using our software and subsequently transfer them onto the machine
We also provide remote support via remote maintenance
In addition to the BMS multi-touch control, the S-Bend series can also be equipped with all other controls.
Demanding bending parts
With the Biegemaster S-Bend, even complex profiles can be created easily and reproducibly. The offset bending beam allows for greater profile variety (e.g., hat, trapezoid, and Z-profiles). The bending beam can be controlled precisely and with millimetre precision for perfect folds. All common profiles from 3 to 12 meters in bending length with material thicknesses of up to 3 mm steel and 4 mm aluminum can be bent precisely. The optimal clamping beam geometry makes large bending angles (150°) with simultaneously lots of free space in the interior of the machine.
Optional: Hydraulic jaw adjustment
The Biegemaster S-Bend is optionally equipped with a hydraulic clamping jaw adjustment to compensate for different sheet metal thicknesses. The manual adjustment to pre-set each clamping beam separately serves to reduce overbends on short profiles.
Many useful additional functions,oriented towards the demands in practice
Clamping beam can be operated with millimetre precision for optimal folds
Clamping jaw adjustment to compensate for different sheet metal thicknesses
Extras & extensions
for the Biegemaster S-Bend
From the tablet to the machine
With the Biegemaster software, profiles can be created on the go on a tablet and then transferred directly to the machine. This makes it easier to prepare for work and allows you to work flexibly. Even right on the construction site or on the road.
Conical back-gauge
The conical back-gauge enables precise bending of profiles with varying depths (narrow-to-wide) and conical edge parts. This allows the metal sheets to be easily plugged together during assembly on the construction site. An integrated laser line indicates the exact position of the sheet metal and supports the millimeter-accurate placement of the cut pieces.
Automatic clamping beam adjustment
The automatic clamping beam adjustment/air gap adjustment automatically compensates for the radii when different sheet thicknesses are used. This ensures that the bending accuracy remains constant for thick sheets, even with changing materials and material thicknesses.
Automatic gripper system
The automatically controlled grippers fix and position the sheet metal throughout the entire bending process. This means no manual interventions, higher process safety, and reproducible results – especially with series production.
Sheet metal-friendly support
Polyethylene pads protect sensitive, painted, or coated sheet metal from scratches and damage. This allows even sensitive materials to be processed safely and gently.
Insertion depth of 1250 mm
For long and large-format cuts, Biegemaster machines can be equipped with an extended insertion depth of up to 1,250 mm. This makes processing large strips easier.
Technical details S-Bend
| model name | working length (mm) | stand/clamp arms | beding performance (mm) | |
| steel | alu | |||
| S-Bend 3.2,00 | 3300 | 3 | 2,00 | 3,00 |
| S-Bend 4.2,00 | 4200 | 4 | 2,00 | 3,00 |
| S-Bend 5.2,00 | 5100 | 5 | 2,00 | 3,00 |
| S-Bend 6.2,00 | 6400 | 6 | 2,00 | 3,00 |
| S-Bend 8.2,00 | 8100 | 8 | 2,00 | 3,00 |
| S-Bend 10.2,00 | 10020 | 10 | 2,00 | 3,00 |
| S-Bend 12.2,00 | 12020 | 12 | 2,00 | 3,00 |
| S-Bend 3.3,00 | 3300 | 4 | 3,00 | 4,00 |
| S-Bend 4.3,00 | 4200 | 5 | 3,00 | 4,00 |
| S-Bend 5.3,00 | 5100 | 6 | 3,00 | 4,00 |
| S-Bend 6.3,00 | 6400 | 8 | 3,00 | 4,00 |
| S-Bend 8.3,00 | 8100 | 10 | 3,00 | 4,00 |
| S-Bend 10.3,00 | 10020 | 12 | 3,00 | 4,00 |
| S-Bend 12.3,00 | 12020 | 14 | 3,00 | 4,00 |
Special lengths and other material thicknesses upon request